在線可拆裝式靶式流量計安裝說明

online detachable target flowmeter
installation instructions

安裝配件  

installation accessories

1、可伸縮流量計裝置；

1, retractable flowmeter device;                

2、球閥；

2、ball valve;

3、焊接短管。

3、welding short tubes.

安裝過程

installation process

1、将焊接短管焊在管道上；

1, welding welded short pipes on the pipeline;

2、将球閥用螺栓固定在焊接短管上；

2, the ball valve is bolted to the welded short pipe;

3、将可伸縮流量計裝置用螺栓固定在球閥上；（注意：按箭頭指示方向固定）

3, the retractable flowmeter device is bolted to the ball valve; (note: fixed by arrow direction)

4、全部固定完畢後，緩慢打開球閥，将流量計緩慢旋進管道，旋到位後按所銑箭槽對準成一字線（保證靶片正對流體方向）,然後将6枚鎖緊螺絲緊固後再調整儀表零點即可。

4, after all the fixed, slowly open the ball valve, slowly rotating the flowmeter into the pipeline, after the rotation is in place, aligned with the milling arrow slot into a line(ensure that the target is in the direction of the fluid), then tighten the six locking screws and adjust the instrument zero point.